History: Pocketsmith II
Preview of version: 19 (current)
|
|
Jaws
The most unique feature of the Pocketsmith tools is their plier head. A cutout form in the jaws is designed to grab onto and loosen the barrel bushing on a 1911 auto pistol. Whereas the original Pocketsmith only had one size cutout in the jaws, the improved Pocketsmith II has two different size cutouts, one on each side. Presumably this is for disassembling different types of pistols.Also included on the plier jaws are a set of crisp serrations running out to the tips, for regular pliering duties. A wire cutter area is down near the pivot, with hard wire notch included.
Handles/Frame
Handles on the Pocketsmith II are complex. The basic frame is made up of two layers of stainless steel, laminated together. Bolted to that are handle scales of green colored aluminum, which has been machined in a rather striking crosshatch pattern. The effect is quite pleasing. It offers good looks and a good grip.Black plastic inserts are located near the base of each handle for comfort.
Blades and Tools
All blades and tools are outside-opening.- plain-edge knife blade, hollow ground, 2.65" long (67mm)
- large flathead screwdriver
- medium flathead screwdriver
- small flathead screwdriver
- two-sided file blade, single and double hatch
- 3/32" allen wrench
- pin punch
- 5/32" allen wrench
Locking Mechanism
None of the blades or tools lock open.Other Features
Pivot screws have standard allen heads, which allow for tightening and loosening of the blades as needed.Sheath
Sheath for the Pocketsmith II is a woven nylon affair with velcro closure. It can be carried either vertical or horizontal.Dimensions
- Length closed = 4.25" (106mm)
- Length open = 6.5" (165mm)
- Thickness = .75" (20mm)
- Weight = 9 oz (252g)
;){kind=link}