History: SwissTool

The ))SwissTool(( was Victorinox's first foray into the plier-type multitool market. It has since set the standard for quality of design and manufacture. The ))SwissTool(( employs outside-opening blades, allowing the user to quickly access them without opening the pliers. This arrangement also makes for a more comfortable feel to the hand when using the pliers.

Pliers

Plier jaws on the SwissTool are best described as semi-needlenose, with tips that are somewhat less pointy than other multitools in its class. The plier jaws have fine serrations out near the tips, coarse serrations in the center, and wire cutters in near the pivot.

At regular intervals throughout its lifespan, Victorinox has incorporated changes to the SwissTool's plier head. (See Variations below) Most significant was in 2002 when the "hand" of the plier pivot direction was reversed. Please check out the SwissTool Plier Heads page for more details.

Handles

))SwissTool(( handles are highly polished stainless steel. One side has a metric scale up to 23mm, the other side has an inch scale up to 9 inches. The Victorinox logo and the full word are stamped onto one side, while a red Victorinox ))SwissTool(( banner is screen printed on the other.

Upon closer inspection, SwissTool handles are far more complex than they first appear. Each handle is made up of four complex components, the jewel of which is an exquisitely made set of individually cut backsprings. Each of the blades is therefore tensioned with its own individual backspring, a set of precision steel fingers that also prevents unwanted blade "clumping." No other multitool manufacturer has backsprings that can compare.

Blades and Tools

Like the Swiss Army Knives produced by Victorinox, many of the SwissTool blades are combination tools, with capabilities designed in for two or more functions.

• wood saw
• can opener/small screwdriver
• cap lifter/medium screwdriver
• chisel/scraper/wire stripper
• large screwdriver/crate opener
• plain edge spear point knife blade

• file blade
• eyeglass screwdriver
• Phillips screwdriver
• awl
• fully serrated spear point knife blade

Other models come equipped with scissors and/or a serrated seatbelt cutter blade. See Variations below.

Locking Mechanism

The SwissTool has a total of eleven "blades", all of which lock open securely. Lock release is accomplished by means of sliding knurled tabs, readily accessable by either hand.

Other Features

Later models of the SwissTool have a D-shaped hole cut into the plier bracket which accepts a corkscrew accessory.

Sheath

Although leather models were offered, most ))SwissTools(( are sheathed in a heavy woven nylon affair, with velcro closure. Both leather and nylon models were also available with swiveling clip mounts.

Dimensions

• Folded length = 4-1/2" (114mm)
• Unfolded length = 6-3/4" (171.5mm)
• Thickness = 3/4" (19mm)
• Weight = 9.8 oz (276g)

Variations

In addition to the original, there are currently three other variations of the ))SwissTool((. The black oxide version is simply the original model with a black finish on all surfaces, including pliers, handles, and blades. The ))SwissTool(( "X" replaces the serrated knife blade with a pair of scissors, while the "RS" version replaces both the serrated blade and the file blade with scissors and a curved, serrated belt-cutter blade respectively.

Note that the "CS" model is not really a different variation, but simply the "X" model packaged with seperate bits, wrench, corkscrew, and eyeglass screwdriver.

model
Standard	plain knife	saw	serrated knife	file
Black Oxide	plain knife	saw	serrated knife	file
SwissTool X	plain knife	saw	scissors	file
SwissTool RS	plain knife	saw	scissors	curved rescue blade
SwissTool CS	same as SwissTool X, but with corkscrew accessory

In addition to these official variations, there have been subtle changes incorporated over the years. Changes to the plier head have been most dramatic, including an upgrade in 2002 from right-hand pivot to left-hand pivot. Please see the SwissTool Plier Heads page for more details. Along with the plier head, there have been a number of slight changes made to some of the blades and tools.

A rare variation is the Charles Elsener autographed model. On this tool, the company owner's signature has been deeply etched into the handle scales.

History

Originally announced in 1997, the SwissTool was not fully into production and generally available until over a year later.

Related Tools

After the success of the SwissTool, Victorinox brought out the AutoTool and the Spirit. These plier-type multitools share many of the same design principles, including outside opening blades and individual backsprings.

More Info

SwissTool Plier Head evolution

• Victorinox SwissTool owner's manual
• SwissTool Review at Multitool.org
• SwissTool page at SAKWiki
• SwissTool Plier Head evolution