History: Corona Clipper Fusion 11
Preview of version: 3
- «
- »
|
| Plugin execution pending approvalThis plugin was recently added or modified. Until an editor of the site validates the parameters, execution will not be possible. |
Jaws
The pruner jaws on the Hybrid are of the bypass type. (as opposed to the anvil type) Jaw opening is such that branches up to 3/4” (20mm) will fit between them. There is also a soft wire cutting notch at the base of the pruner section.The jaws are spring-loaded by means of a hidden clothespin spring. A thumb activated safety lock bar holds them in the closed position when not in use.
Handles/Frame
The Hybrid’s handles have an underlying frame made from a U-shaped channel of stainless steel. Attached to the steel is a contoured set of scales made from high impact yellow plastic. Overmolding the yellow plastic are inlays of soft black rubber, positioned where the hand would normally grip. Despite being an inside-opening style tool, the Hybrid is not uncomfortable to squeeze hard on.Blades and Tools
One handle houses a long wood saw blade and a combination flathead screwdriver/cap lifter/sprinkler tool implement.The opposite handle includes a weed cutter tool with a 3” ruler stamped on it, a phillips screwdriver, and a grafting knife blade. The knife blade is 2-1/4” long (57mm) and has a modified sheepsfoot profile to it. On the backside of the blade is a ground section that the User’s Guide refers to as a “bark lifter.” (see picture below)
|
| |
grafting knife blade |
Locking Mechanism
None of the blades lock open.Other Features
None.Sheath
The sheath is made from heavy black nylon. The top does not close, and it is designed to carry the Hybrid either in the folded or the unfolded position. The backside has a traditional belt loop, along with a heavy spring steel pocket clip for quicker carry.Dimensions
- Folded length = 4-3/4" (120mm)
- Unfolded length = 8" (203mm)
- Thickness = 7/8" (23mm)
- Weight = 8.7 oz (247g)
;){kind=link}